How to Start a Snowblower Guide

If you have a snow blower that has been sitting for a while, it can be tricky to get it started up again. Here is a complete guide on how to start a snowblower that has been sitting, so you can clear your lawn and get on with your day.

  1. Check the oil level in the snow blower. If the oil is low, add more oil until it reaches the full line on the dipstick.
  2. Check the gas tank to make sure there is enough fuel. If the tank is empty, fill it up with fresh gas.
  3. Inspect the spark plug and clean it if necessary. Use a spark plug wrench to remove the old spark plug and install a new one.
  4. Make sure the choke is in the “open” position.
  5. Turn the gas valve to the “on” position.
  6. Pull the starter cord to start the snow blower. If it doesn’t start, repeat these steps until it does.

Watch video to learn How to Start a Snowblower

Once your snow blower is started, you can begin clearing your lawn of snow! Enjoy the rest of your winter season worry-free.

Working of a Snowblower

Snow blowers are an essential tool for clearing paths and driveways during winter. They use an auger to push snow into a discharge chute, which throws the snow out of the way. Snow blowers are more efficient and less time-consuming than shovels, and they are more reliable in heavy snowfall. Snow blowers have a powerful engine that helps the user to lift the snow and blow it sideways.

Types of Snowblowers

If you live in an area with heavy snowfall, you’ll need a two-stage snowblower. Two-stage models have two augers: one to suck up the snow and another to discharge it through the chute. Two-stage models can handle snowfalls of up to 12 inches.

Two-stage snowblowers are powerful machines that can handle large amounts of snow. They are different from single-stage snowblowers in that they have a main auger whose only purpose is to suck the snow. An additional auger, often called an “impeller,” is installed in this snowblower that crushes and discharges the snow out of the chute. This type of snowblower is more efficient and powerful as it can clear snow up to 35 inches. They are also effective in rigid places like rocks and gravel sideways as the auger is not in direct contact with the surface.

If you are looking for a powerful and efficient snowblower, then a two-stage snowblower is the ideal choice for you. These snowblowers can handle large amounts of snow and are perfect for clearing your driveway or path quickly and easily. So, if you want a machine that can make short work of even the heaviest snowfall, then a two-stage snowblower is the way to go.

Reasons Behind the Damage of A Snowblower

Here are three main reasons behind the damage of any snowblower.

Inclusion of Fuel Inside Snowblower in Summers

If you don’t empty the fuel out of your snow thrower before storing it during the warmer months, it can do serious damage. Gas can thicken and clog the carburetor, and cause a bad fuel smell when you use the snowblower again after a long time. To prevent this, use a siphon to empty the fuel or add some fuel stabilizer. Another option is to leave the snow thrower running until the gas burns out.

Keeping Untidy

Before using your snowblower, always check the fuel level. Replace the spark plug once a year and clean the carburetor with a carburetor cleaner. This will improve the performance of your snow thrower. Be sure to tighten any loose screws and bolts, especially those that are more likely to loosen. Also, keep an eye on the condition of the paddles and replace them if they show signs of wear. Doing all of these things will help extend the life of your snowblower.

Low Blade Level

If you’re cutting concrete or stone, it’s important to keep the blade at a moderate level. Keeping the blade too low could result in it scraping against the rock or concrete, which could damage the blade.

How to Start a Snowblower?

If you want to avoid the last-minute panic of trying to operate a seasonal tool like a snowblower, it’s best to take it out before the snowfall season begins. Give it a try and familiarize yourself with the controls so you’ll be prepared when the first flakes start to fall.

Place it in a Secure Area

Before taking your snowblower out for a test drive, it’s best to take it to a clean and open space. This will make it easier for you to examine the snowblower and will also keep you safe from possible injuries.

Check the Maintenace

If you haven’t used your snowblower in a while, it’s important to do a quick maintenance check before firing it up again. This will help ensure that you don’t do any damage to the machine and that it runs smoothly.

Start by taking the snowblower to a clean area. Then, check for any loose bolts or screws, and remove any debris that you see both inside and outside the machine. Next, examine the spark plug using a tester. Finally, check the oil level and add fresh fuel if needed. Additionally, be sure to check the tire pressure before using the snowblower.

Observe the temperature of the Snowblower

If you stored your snowblower in a cool environment, you can use it right away. However, if it was stored in a cold place, you need to turn off the choke. Turning the choke off would decrease the air supply into the carburetor which would result in a higher concentration and less tainted mixture of fuel. For that,  you have to set the choke to “full” or “close” depending on the model.

Turn the ignition on

Make sure the temperature is warm enough to start the engine. If it’s too cold, the snowblower may not start or may run poorly.

Turn on the ignition and prime the engine by pressing the primer bulb a few times. If you have closed the choke, open it slowly until the engine starts working smoothly.

Now you’re ready to start snow-blowing!

Set the throttle

If you want to get the best performance out of your snowblower, it’s important to get rid of any dirty old fuel that might be lingering in the machine. To do this, simply adjust the throttle to its highest level. This will cause any leftover fuel to be burned off, leaving your snowblower clean and ready to go. Now you can get to work clearing your property of snow and ice!

Final Words:

By following these tips, you can ensure that your snowblower is ready to go when the first flakes start to fall. Taking care of your machine and getting it ready for use ahead of time will save you a lot of hassle later on. So don’t wait until the last minute – get your snowblower out and give it a try today!

Honda Snow Blower
Logo